Superior Wi-Fi for your Whole Home up to 15,000 sq ft1
ALLY is a Whole Home Smart Wi-Fi System that will transform the way your family experiences Wi-Fi. It's capable of up to 15,000 sq ft of smart, safe, secure Wi-Fi that is designed with the whole family in mind. Controlled by an App, ALLY gives full control over how and when the internet is used, and who gets to use it. With an added layer of web security by AVG.1
Which ALLY is right for your home?
Coverage, Everywhere
Access the Internet from every room in your home, even the patio, with high power amplifiers & high gain antennas.
Ultra-Fast AC1900 Wi-Fi
Stream HD and 4K games and videos on multiple devices at once with blazing-fast AC1900 Wi-Fi speeds.3
Coverage, Everywhere
Access the Internet from every room in your home, even the patio, with high power amplifiers & high gain antennas.
Seamless Roaming
Cruise throughout your home on any device with no fear of dead zones, dropped signals or interruptions using one network name.5
Ultra-Fast AC1900 Wi-Fi
Stream HD and 4K games and videos on multiple devices at once with blazing-fast AC1900 Wi-Fi speeds.3
Secured by AVG
Protect the devices on your network from malware and phishing attacks by blocking harmful websites.
On-The-Go Security
Get activity alerts when unknown devices try to connect to your network. Security at home, no matter where you are.
You Call the Shots
With smart parental controls, you can create user profiles for each member of the family and set individual Wi-Fi access schedules, pause the Internet during homework or dinner time and much more.
Your Custom Internet
Manage what your kids can see online by blocking their access to specific apps on their device.
Filter Out the Bad
Limit or block your kids' access by content categories or by exact website addresses.
Activity Reports
See a report of activity that was blocked, so you can keep a tab on what they're up to.
Pause Online Gaming
Encourage offline activities for the kids by pausing their access to PlayStation™ Network and Xbox Live any time you want.
No More Dead Zones
The ALLY Wi-Fi System blankets your home with high performing, high power Wi-Fi that pushes through walls to fill your home and beyond. It eliminates buffering and lag on all your devices with Multi-User MIMO Wi-Fi.2
App Setup
Set up your new ALLY Wi-Fi network in minutes, with easy to follow steps within the app.
Specifications are subject to change without notice.
1 Range specifications are based on performance test results. Actual performance may vary due to differences in operating environments, building materials and wireless obstructions. Performance may increase or decrease over the stated specification. Wireless coverage claims are used only as a reference and are not guaranteed as each wireless network is uniquely different. Maximum wireless signal rate derived from IEEE 802.11 standard specifications. Actual data throughput may vary as a result of network conditions and environmental factors. May not work with non-standard Wi-Fi devices such as those with proprietary software or drivers. Supports all Wi-Fi standards that are compatible or backwards compatible with 802.11a/b/g/n/ac Wi-Fi standards. 2 For MU-MIMO to work, additional MU-MIMO capable devices must be connected to the network. 3 All transmission rates listed, for example 600Mbps for 2.4GHz and 1300Mbps for 5GHz, are the physical data rates. Actual data throughput will be lower and may depend on external factors as well as the combination of devices connected to the router. AC1900 wireless speeds are achieved when connecting to other AC1900 capable devices. 4 The ALLY app and its features may change without notice. The ALLY app is provided by AVG and subject to the terms available at http://www.chimewifi.com/tos 5 Connecting devices must support seamless roaming Wi-Fi technologies for uninterrupted seamless roaming between ALLY devices. A single network identification name (SSID) is used for each individual Wi-Fi frequency: 2.4GHz and 5GHz. 6 Activity Reports may not be available with first App release. 7 Mobile device are not included.
AVG® is a registered trademark of AVG Netherlands B.V. “PlayStation” is a registered trademark of Sony Computer Entertainment Inc. “PS4” is a trademark of the same company. Xbox is a trademark of Microsoft Corporation in the United States and/or other countries.
ALLY is a Whole Home Smart Wi-Fi System that will transform the way your family experiences Wi-Fi. It's capable of up to 15,000 sq ft of smart, safe, secure Wi-Fi that is designed with the whole family in mind. Controlled by an App, ALLY gives full control over how and when the internet is used, and who gets to use it. With an added layer of web security by AVG.
Wi-Fi Coverage for your Entire Home and Backyard up to 15,000 sq ft With high power amplifiers and high gain internal antennas, ALLY blankets every inch, nook, cranny and corner of your home with powerful Wi-Fi that reaches beyond your expectations.1
Limit What Kids See with Advanced Parental Controls ALLY is your friend on the home front, making it easy to manage where kids can go online. Simply block access or limit use of content, websites or apps using your mobile app.
Schedule Online Time with Curfews With ALLY's advanced Parental Controls, you can set individual Wi-Fi schedules for each of your children. And even pause the Internet when you need their undivided attention.
Gain Visibility with Website Activity Logs See clearly what kids are up to online with a list of websites visited and which ones ALLY blocked. Discover how to adjust your Parental Controls to enforce house rules.
Stay on High Alert with Notifications You want to trust kids, but they're curious, as are their friends. ALLY notifies you if anyone attempts to access restricted content, so you can stay informed and at ease.
Protect your Home with Web protection by AVG® Your family's privacy deserves the best online protection. Keep your entire Wi-Fi network and all your devices safe from malware with powerful, built-in Web protection by AVG.
More Streaming with Ultra-Fast Wi-Fi Speeds With ultra-fast, AC1900 whole home Wi-Fi, everyone in your family can actually stream HD and 4K videos and games on multiple devices at once – with no buffering delays.3
Roam Seamlessly Throughout your Home with your Device ALLY knows you rarely sit still, even at home. Feel free to move from one room to another – even outside and back – with a single network connection and no fear of dead zones or interruptions.5
More Streaming for Everyone with MU-MIMO Technology Standard routers and extenders stream data to one device at a time. ALLY is built with MU-MIMO technology that delivers more speed by serving data to multiple devices at once.2
Share Files Faster with USB 3.0 Built with a USB 3.0 port, you can attach a USB storage device to ALLY and everyone on the network can access the files. Share and save files quickly, with ease, and even access them remotely via FTP.
Specifications are subject to change without notice.
1 Range specifications are based on performance test results. Actual performance may vary due to differences in operating environments, building materials and wireless obstructions. Performance may increase or decrease over the stated specification. Wireless coverage claims are used only as a reference and are not guaranteed as each wireless network is uniquely different. Maximum wireless signal rate derived from IEEE 802.11 standard specifications. Actual data throughput may vary as a result of network conditions and environmental factors. May not work with non-standard Wi-Fi devices such as those with proprietary software or drivers. Supports all Wi-Fi standards that are compatible or backwards compatible with 802.11a/b/g/n/ac Wi-Fi standards. 2 For MU-MIMO to work, additional MU-MIMO capable devices must be connected to the network. 3 All transmission rates listed, for example 600Mbps for 2.4GHz and 1300Mbps for 5GHz, are the physical data rates. Actual data throughput will be lower and may depend on external factors as well as the combination of devices connected to the router. AC1900 wireless speeds are achieved when connecting to other AC1900 capable devices. 4 The ALLY app and its features may change without notice. The ALLY app is provided by AVG and subject to the terms 5 Connecting devices must support seamless roaming Wi-Fi technologies for uninterrupted seamless roaming between ALLY devices. A single network identification name (SSID) is used for each individual Wi-Fi frequency: 2.4GHz and 5GHz. 6 Activity Reports may not be available with first App release. 7 Mobile device are not included.
AVG® is a registered trademark of AVG Netherlands B.V. “PlayStation” is a registered trademark of Sony Computer Entertainment Inc. “PS4” is a trademark of the same company. Xbox is a trademark of Microsoft Corporation in the United States and/or other countries.
Check that your modem is powered on and your ALLY Router is connected properly. Try setup again.
Reset your modem by holding down the reset button located on the back of the modem for approximately five seconds. Try the automatic configuration again.
Static IP: Your Internet connection may require a static IP setting. Check with your ISP to obtain the IP settings. You can set Static IP using the ALLY app by running through the setup process and tapping "Manually configure your ALLY" when the Connection Error page appears.
DSL Connections: Your Internet connection may require login information. If you are using PPPoE mode, you will need to manually configure your Internet connection settings and obtain your username and password. You can set a PPPoE connection using the ALLY app by running through the setup process and tapping "Manually configure your ALLY" when the Connection Error page appears.
During the setup process your mobile device will disconnect from the ALLY Wi-Fi network as it applies the new Wi-Fi settings to the ALLY Router. At this time, your mobile device may have joined another Wi-Fi network that does not have Internet access. Please check that your mobile device is connected to a Wi-Fi network with an active Internet connection and go back to the ALLY app.
The ALLY Router and the ALLY app can no longer communicate. Check that the ALLY Router is connected to the modem correct. Reboot your modem or the ALLY Router if necessary.
If you are using an Android mobile device, please check that your "Smart Network Switch" is toggled off.
Go to the ALLY app and tap on the settings icon on the top right corner of the home screen. From the settings screen tap "Erase all data & disconnect ALLY". This will remove your ALLY Router and allow you to set the ALLY Router to a new account or an existing account.
To set up your ALLY with the ALLY app, you need and Android or iOS device with an Internet connection. Currently we support Android 4.4 and up and iOS 9 and up.
If you cannot download the app, please access the web setup by connecting your mobile device to the ALLY’s Wi-Fi network. Open a web browser and go to http://setup.ampedwireless.com. Follow the instructions on the screen to complete setup.
If your network is up and running, the header of the Home screen of the ALLY app is green, and you’ll see a message that says "ALLY is online". If your network is offline, the header is red, and it will say "ALLY is offline".
On the Home screen, tap the Devices button to open the Connected Devices list.
Tap the + sign in the top-right corner. Here you can see the network names and passwords for all your Wi-Fi networks. NOTE: You should be careful about who you give your passwords to.
On the Home screen, tap the gear icon in the upper-right corner to open the Settings menu.
Under the Network section, tap Edit Wi-Fi Networks.
To edit, tap the network name or the network password. Enter a new network name and/or network password. NOTE: Passwords must be 8 to max 15 characters long. TIP: Tap the magic wand to create a strong password automatically.
ALLY allows you to create a Guest Wi-Fi for sharing your Wi-Fi without giving access to your main network where all your personal devices are communicating. To create a Guest Wi-Fi follow the steps below.
Open the ALLY app.
On the Home screen, tap the gear icon in the upper-right corner to open the Settings menu.
Under the Guest Network section, toggle the Guest Wi-Fi switch to turn on. You can disable the Guest Wi-Fi at any time by following the same steps.
Devices that show up in your devices list may look unfamiliar because their names are confusing or unclear. If you come across a device that you don’t recognize, look for the manufacturer’s name on the Devices screen and see if you recognize it. If that doesn’t work, you may also look up your device’s MAC address and compare it to the MAC address that is shown on the Device Settings screen. The MAC address of a device can usually be found in the About Device section in your device’s Settings.
The ALLY Router and the ALLY app can no longer communicate. Check that the ALLY Router is connected to the modem correct. Reboot your modem or the ALLY Router if necessary.
When enabled AVG protection scans the Internet traffic on your network and automatically blocks known malicious links or websites right on the router, before they reach your connected devices.
AVG protection provides an additional layer of security for your connected devices. It does not replace an antivirus product. We recommend that you install and use an up-to-date antivirus product.
Website Filtering may take some minutes to come into effect across your devices. If you keep having trouble with Website Filtering, please feel free to give us a call.
App Blocking allows you to manage Internet access for individual apps and services. Apps that do not require an Internet connection, like games, may still work.
Curfew lets you set times for when you want your family members to be offline and not access the Internet. Curfew does not lock devices. Apps and services that can be launched and used without an Internet connection may still work.
Go to the AVG My Account website: https://myaccount.avg.com. Log in using your ALLY app details. Then select My Profile in the menu bar. Here you can change your ALLY account password.
Go to the ALLY app and tap on the settings icon on the top right corner of the home screen. From the settings screen tap "Erase all data & disconnect ALLY". This will remove your ALLY Router and allow you to set the ALLY Router to a new account or an existing account.
ALLY app will automatically alert you if a firmware update is available when you use the app. If you want to check for updates, go to Settings and tap Firmware Update.
We care about your privacy and want you to have more control over how we collect and use your data. Please read our privacy policy to understand what data we collect, why we collect it, and how we use it. To read the ALLY App Privacy and Cookie Policy, visit: http://www.chimewifi.com/privacypolicy/
To access the advanced settings menu, connect to the ALLY’s Wi-Fi network. Open a web browser and go to: http://setup.ampedwireless.com. You will be prompted for a password which can be found on the ALLY app by going to Settings (icon on the top right corner of the status page) and then going to Advanced settings. Some features on the Web Menu will be disabled when the Router is in use with the ALLY app.
If you have never set the ALLY Router up using the ALLY app follow these steps: Power on the ALLY Router and connect to the ALLY’s Wi-Fi network. Open a web browser and go to: http://setup.ampedwireless.com to access the web menu and web based setup wizard. Follow the steps to configure your ALLY Router.
If you have previously configured the ALLY Router using the ALLY app and you wish to no longer use the ALLY app with the Router follow these steps. While the ALLY Router is powered on, reset the ALLY Router by pressing the Reset button on the bottom of the Router for 10 seconds. The status light should blink rapidly when the Router has been reset. Once this is done, follow the steps in "a" to configure the Router using the web menu.
Make sure your computer is connected to the Router using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Router is on.
Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi connection and disconnect from all wireless networks. Reboot the router and try again.
Close your current web browser and reopen it. Use Google Chrome or Internet Explorer (v8.0 and up).
Open your web browser and enter 192.168.3.1 into the web address bar.
If you can access the web menu, but not the Setup Wizard, the Router may have previously been configured. There is a link to re-access the Setup Wizard from the Dashboard. Scroll to the bottom of the Dashboard page to find the Setup Wizard link.
Another way to access the Setup Wizard is to reset the Router to default settings by holding the Reset Button (located on the back panel) for ten (10) seconds and try again. The Setup Wizard will always appear if the Router has not yet been configured. After it has been configured the Dashboard will appear instead.
Make sure your computer is connected to the Router using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Router is on.
Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi connection and disconnect from all wireless networks. Reboot the router and try again.
Close your current web browser and reopen it. Use Google Chrome or Internet Explorer (v8.0 and up).
Open your web browser and enter 192.168.3.1 into the web address bar.
If the Setup Wizard appears instead of the Dashboard, the Router has not yet been configured. Complete the Setup Wizard or skip the Setup Wizard to access the Dashboard.
Reset the Router to default settings by holding the Reset Button (located on the back panel) for ten (10) seconds and try again. Complete the Setup Wizard or skip the Setup Wizard to access the Dashboard.
Check that you are using a supported web browser: Google Chrome, Internet Explorer (8.0 and up) and Safari. If you are using an unsupported web browser, such as Firefox, please change to one of the supported web browsers and try again.
Reset your modem by holding down the reset button located on the back of the modem for approximately five seconds. Try the automatic configuration again.
Static IP: Your Internet connection may require a static IP setting. Check with your ISP to obtain the IP settings.
DSL Connections: Your Internet connection may require login information. If you are using PPPoE mode, you will need to manually configure your Internet connection settings and obtain your username and password.
Cable Modem: Your Internet connection may require you to clone your MAC address. Go to More Settings > IP Settings > Internet Network (WAN) and select Automatic/Dynamic (DHCP) from the drop down menu. Clone your PC’s MAC address under the DNS settings.
Detach the power adapter and disconnect all computers from the ALLY Router. Turn off the power to your modem and remove the backup battery (if available). Wait 2 minutes and power the modem back on. Wait 2 minutes for the modem to initialize. Power on the Router and connect your computer to the router. Open your web browser and try to access the Internet.
Check that your Internet connection through the modem is working. Power off the ALLY Router and disconnect your computer from the router. Turn off the power to your modem and remove the backup battery (if available). Wait 2 minutes and power the modem back on. Wait 2 minutes for the modem to initialize. Attach your computer directly to the modem and power on your computer. Open your web browser and check to see if you can go online. If you cannot go online, there may be a problem with your Internet provider. Please contact your Internet provider to troubleshoot your connection issues.
Power off your computer, the ALLY Router and your modem. Power on your modem and wait 2 minutes. Power on the Router and wait 1 minute for the router to initialize. Power on your computer and try again.
Check to see if other computers are also having this problem. If they are not, check to see if your anti-virus software or firewall software is conflicting with your Internet connection. You may also try temporarily disabling all firewalls or anti-virus software to see if that is what is causing the problem.
If you have a PPPoE or another Internet connection requiring login credentials, you may need to adjust the reconnection or time out settings. If you are using the Web Menu for setup: Go to the IP Settings > Internet Connection (WAN) page and configure your Internet connection to automatically reconnect. For ALLY App based setups select manual setup once the Internet connection detection error page appears.
If you are using Windows XP, check that your computer is using Service Pack 2 or greater. Windows XP users with Service Pack 1 may experience intermittent wireless connections.
Check with your Internet provider to ensure that they are not experiencing system wide issues.
Check with speedtest.net to see the speed of your Internet provider. Connect directly to your modem with your computer and check speedtest.net again. If the speed results are the same, the issue is with your Internet provider. Please contact your provider to troubleshoot the issue.
Check the Internet connection speed on another computer that is connected to the Router. If the other computer does not have Internet speed problems, the networking equipment or operating system on your original computer may be outdated or may be experiencing problems. Viruses and other software may slow down a computer’s overall speed significantly.
If you are using a wireless connection to the Router, check that your wireless signal strength is above 3 bars. If not, you may need to move closer to the Router.
Step back at least 10 feet from the ALLY Router and check your signal again. The ALLY Router emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close range. The speed and signal are at 100%, however your readout may not be displaying the data correctly.
Change the wireless channel on your ALLY Router to find a channel with less interference. Do this for both 2.4GHz and 5.0GHz wireless networks. To assist in finding the right channel, download the Amped Wireless Wi-Fi Analytics Tool for your Android or PC. Changing the Wi-Fi channels can be done via the Web Menu and not the ALLY app.
Check if other computers are experiencing the same issue. If not, the wireless adapter in your computer may be experiencing problems or maybe older and have poor wireless performance.
Avoid placing the ALLY Router near or around Microwaves and 2.4GHz wireless phones.
Avoid using wireless channels that are crowded. Change the wireless channel on the ALLY Router.
Place the ALLY Router in a higher location near the center of your desired coverage location.
Your wireless network adapter may be outdated and have older wireless technology not capable of achieving the wireless network speeds of the Router. To achieve maximum wireless speeds, it is required that you have an 802.11n (2.4GHz) or 802.11ac (5.0GHz) adapter. To obtain a data rate of 1733Mbps on the 5GHz band or 800Mbps on the 2.4GHz band the network adapter used to connect to the Router must support the same data rates.
Wireless speeds degrade as you get further away from the wireless router.
Check that the wireless channel set on the Router is not crowded. Try changing the wireless channel to another channel and test the speed again.
Do not use Internet websites (i.e. speedtest.net or other websites) to test your wireless speeds. Speed test websites measure your Internet connection speed, which is controlled by your Internet provider. Wireless speeds are for your local network and not your Internet connection. To test wireless speeds, a local test or file transfer will be required to test the true wireless speed.
Check that the connected devices support MU-MIMO technology. All connected devices must also support MU-MIMO to enable the MU-MIMO function. If the connected device does not support MU-MIMO it will function as a SU-MIMO (single-user MIMO) device.
Make sure your computer has the latest Windows Service Pack. Windows Service Pack 1 does not support WPA security. Upgrade to the latest Service Pack to support the latest wireless encryption.
Manually add a wireless network to your XP computer.
Wi-Fi Coverage for your Entire Home and Backyard up to 15,000 sq ft With high power amplifiers and high gain internal antennas, ALLY blankets every inch, nook, cranny and corner of your home with powerful Wi-Fi that reaches beyond your expectations.1
Limit What Kids See with Advanced Parental Controls ALLY is your friend on the home front, making it easy to manage where kids can go online. Simply block access or limit use of content, websites or apps using your mobile app.
Schedule Online Time with Curfews With ALLY's advanced Parental Controls, you can set individual Wi-Fi schedules for each of your children. And even pause the Internet when you need their undivided attention.
Gain Visibility with Website Activity Logs See clearly what kids are up to online with a list of websites visited and which ones ALLY blocked. Discover how to adjust your Parental Controls to enforce house rules.
Stay on High Alert with Notifications You want to trust kids, but they're curious, as are their friends. ALLY notifies you if anyone attempts to access restricted content, so you can stay informed and at ease.
Protect your Home with Web protection by AVG® Your family's privacy deserves the best online protection. Keep your entire Wi-Fi network and all your devices safe from malware with powerful, built-in Web protection by AVG.
More Streaming with Ultra-Fast Wi-Fi Speeds With ultra-fast, AC1900 whole home Wi-Fi, everyone in your family can actually stream HD and 4K videos and games on multiple devices at once – with no buffering delays.3
Roam Seamlessly Throughout your Home with your Device ALLY knows you rarely sit still, even at home. Feel free to move from one room to another – even outside and back – with a single network connection and no fear of dead zones or interruptions.5
More Streaming for Everyone with MU-MIMO Technology Standard routers and extenders stream data to one device at a time. ALLY is built with MU-MIMO technology that delivers more speed by serving data to multiple devices at once.2
Share Files Faster with USB 3.0 Built with a USB 3.0 port, you can attach a USB storage device to ALLY and everyone on the network can access the files. Share and save files quickly, with ease, and even access them remotely via FTP.
Specifications are subject to change without notice.
1 Range specifications are based on performance test results. Actual performance may vary due to differences in operating environments, building materials and wireless obstructions. Performance may increase or decrease over the stated specification. Wireless coverage claims are used only as a reference and are not guaranteed as each wireless network is uniquely different. Maximum wireless signal rate derived from IEEE 802.11 standard specifications. Actual data throughput may vary as a result of network conditions and environmental factors. May not work with non-standard Wi-Fi devices such as those with proprietary software or drivers. Supports all Wi-Fi standards that are compatible or backwards compatible with 802.11a/b/g/n/ac Wi-Fi standards. 2 For MU-MIMO to work, additional MU-MIMO capable devices must be connected to the network. 3 All transmission rates listed, for example 600Mbps for 2.4GHz and 1300Mbps for 5GHz, are the physical data rates. Actual data throughput will be lower and may depend on external factors as well as the combination of devices connected to the router. AC1900 wireless speeds are achieved when connecting to other AC1900 capable devices. 4 The ALLY app and its features may change without notice. The ALLY app is provided by AVG and subject to the terms available at http://www.chimewifi.com/tos 5 Connecting devices must support seamless roaming Wi-Fi technologies for uninterrupted seamless roaming between ALLY devices. A single network identification name (SSID) is used for each individual Wi-Fi frequency: 2.4GHz and 5GHz. 6 Activity Reports may not be available with first App release. 7 Mobile device are not included.
AVG® is a registered trademark of AVG Netherlands B.V. “PlayStation” is a registered trademark of Sony Computer Entertainment Inc. “PS4” is a trademark of the same company. Xbox is a trademark of Microsoft Corporation in the United States and/or other countries.
Browse the selections below to view support materials and troubleshooting tips. FAQs provide you with answers to frequently asked questions. The Download section provides you with firmware upgrades or device drivers and other related software. To view the User's Guide for your product check out the Documentation section. If you are having problems finding what you need, contact us.
Important: Before upgrading firmware, always save your current settings from the Save/Reload Settings page.
To access from the web menu: More Settings > Management > Save/Reload Settings > Save Settings to File After the firmware updates, load your saved settings to keep your existing configurations.
Specifications are subject to change without notice.
1 Range specifications are based on performance test results. Actual performance may vary due to differences in operating environments, building materials and wireless obstructions. Performance may increase or decrease over the stated specification. Wireless coverage claims are used only as a reference and are not guaranteed as each wireless network is uniquely different. Maximum wireless signal rate derived from IEEE 802.11 standard specifications. Actual data throughput may vary as a result of network conditions and environmental factors. May not work with non-standard Wi-Fi devices such as those with proprietary software or drivers. Supports all Wi-Fi standards that are compatible or backwards compatible with 802.11a/b/g/n/ac Wi-Fi standards. 2 For MU-MIMO to work, additional MU-MIMO capable devices must be connected to the network. 3 All transmission rates listed, for example 600Mbps for 2.4GHz and 1300Mbps for 5GHz, are the physical data rates. Actual data throughput will be lower and may depend on external factors as well as the combination of devices connected to the router. AC1900 wireless speeds are achieved when connecting to other AC1900 capable devices. 4 The ALLY app and its features may change without notice. The ALLY app is provided by AVG and subject to the terms available at http://www.chimewifi.com/tos 5 Connecting devices must support seamless roaming Wi-Fi technologies for uninterrupted seamless roaming between ALLY devices. A single network identification name (SSID) is used for each individual Wi-Fi frequency: 2.4GHz and 5GHz. 6 Activity Reports may not be available with first App release. 7 Mobile device are not included.
AVG® is a registered trademark of AVG Netherlands B.V. “PlayStation” is a registered trademark of Sony Computer Entertainment Inc. “PS4” is a trademark of the same company. Xbox is a trademark of Microsoft Corporation in the United States and/or other countries.
Wi-Fi Coverage for your Entire Home and Backyard up to 15,000 sq ft
Limit What Kids See with Advanced Parental Controls
Schedule Online Time with Curfews
Gain Visibility with Website Activity Logs
Stay on High Alert with Notifications
Protect your Home with Web protection by AVG® 
More Streaming with Ultra-Fast Wi-Fi Speeds
Roam Seamlessly Throughout your Home with your Device
More Streaming for Everyone with MU-MIMO Technology
Share Files Faster with USB 3.0
